| Place of Origin: | Suzhou, Jiangsu, CN |
| Brand Name: | UNM |
| Model Serial | BZM |
| Certification: | SGS, ROSH |
| Minimum Order Quantity: | 100㎡ |
| Packaging Details: | Carton |
| Delivery Time: | 7-15days |
| Payment Terms: | T/T |
| Daily output | 60000m/24h |
The fuel cell is a device that generates electrical energy through the reverse reaction of internal water electrolysis. Compared with ordinary batteries, the fuel cell are not limited by the Carnot cycle, the theoretical energy utilization rate of power generation is as high as 90%, and less pollution. The proton exchange membrane is generally composed of ePTFE proton exchange membrane and perfluorosulfonic acid filling.
ePTFE membrane, PTFE membrane, ePTFE Proton exchange membrane, PTFE proton membrane, ePTFE membrane for fuel cell, ePTFE film, ePTFE filter film, PTFE film, ePTFE membrane for hydrogen ba.
Fuel cell, new energy batteries, Hydrogen battery.
| Code No | AVE. Thickness | Air Permeability | Breaking Strength | Elongation Strength | ||
| um | L/㎡`s@500Pa | MD(MPa) | TD(MPa) | MD(%) | TD(%) | |
| ZM10S | 10 | 30 | 16 | 24 | 80 | 60 |
| ZM10H | 10 | 20 | 36 | 30 | 60 | 65 |
| BZM05G | 5-11 | 17 | 10 | 10 | 75 | 60 |
| BZM10G | 10-17 | 15 | 18 | 19 | 75 | 60 |
| BZM15G | 15-23 | 13 | 20 | 21 | 75 | 60 |
| BZM20G | 20-30 | 11 | 23 | 24 | 75 | 60 |
The breaking strength of ePTFE proton exchange membrane can reach 35MPa
The ePTFE proton exchange membrane has a low swelling rate, which is beneficial to the tightness of the fuel cell.
The average pore size is 100nm and the film thickness is 10um. The thinner the membrane, the higher he conductivity of the protons.
The hydrophilic ePTFE membrane is used as the base membrane, and the Perfluorosulfonic acid resin is fully filled into the micropores.
The cost is significantly lower than that of traditional proton exchange membranes.
